Key features
- ADSL2+ router and VoIP in one box
- Supports SIP and VoIP voice compression
- Supports G.711 law and G.729 standards
- Supports Telephony Features
- QoS control
- T.38 FAX
- VPN - IPSec, 3DES & IKE Polices
- Least Cost Routing
- Calls over Internet / ISDN / PSTN
ADSL Compliance
VoIP
- Two RJ-11 FXS
- One RJ-45 FXO ISDN / PSTN
- Compliant with SIP (RFC3261)
Hardware Specification
Physical Interface
- WLAN: antenna
- WAN: ADSL port
- Telephone: 2-port FXS 1-port FXO (For ISDN or PSTN Fixed-line)
- LAN: 4-port 10/100M auto-crossover(MDI/MDI-X) Switch
- Console: the Ethernet Port # 4 can be also connected to console
- Factory default reset button
- Power jack
- Power switch
Physical Specification
- Dimensions: 8.27" x 5.83" x 1.42.(210mm x 148mm x 36mm)
Power Requirement
- Input: 12V DC, 1.2A Operating
Environment
- Operating temperature: 0 ~ 40ºC
- Storage temperature: -20 ~ 70ºC
- Humidity: 20 ~ 95% non-condensing
|
|
The magical All-in-one-Box.
- ADSL/2/2 + modem
- 802.11g WLAN
- Phone switchboard for fixed line
- Adapter (SIP standard)
Network Protocols and Features
- NAT and RIP1,2
- UPnP Support
- DDNS
- Virtual Server
- DMZ
Wireless 802.11g up to 54 Mbps
- IEEE 802.11g & 802.11b
- 2.4 GHz - 2.484G Hz>
- Up to 54 Mbps
- 64/128 bits WEP
- WPA-PSK/WPA2-PSK
- WDS Repeater Function
Firewall
- NAT firewall
- Stateful Packet Inspection (SPI)
- Prevent DoS attacks including IP Spoofing etc.
- Packet filtering port etc.
- URL Content Filtering
Management
- Quick Installation Wizard
- Web-based GUI for local and remote management
- Firmware upgrade
- Embedded Telnet
- Available Syslog monitoring
- SNMP v3, MIB-I & MIB-II support
- Support DHCP
ISDN
- Compatible with Euro ISDN
- Fixed-line voice calls
- Auto-failover for Internet access when ADSL line is down
|
